C
HAPTER
20
| System Management Commands
System Status
– 712 –
COMMAND USAGE
For a description of the items shown by this command, refer to "Displaying
System Information" on page 119. Note that the System Temperature field
only applies to the ECS3510-52T. The ECS3510-28T does not have a
thermal detector.
EXAMPLE
Console#show system
System Description : ECS3510-52T
System OID String : 1.3.6.1.4.1.259.10.1.27.102
System Information
System Up Time : 0 days, 0 hours, 10 minutes, and 28.55 seconds
System Name :
System Location :
System Contact :
MAC Address (Unit 1) : 70-72-CF-84-89-76
Web Server : Enabled
Web Server Port : 80
Web Secure Server : Enabled
Web Secure Server Port : 443
Telnet Server : Enabled
Telnet Server Port : 23
Jumbo Frame : Disabled
System Temperature:
Unit 1
Temperature 1: 34 degrees
Console#
show tech-support This command displays a detailed list of system settings designed to help
technical support resolve configuration or functional problems.
COMMAND MODE
Normal Exec, Privileged Exec
COMMAND USAGE
This command generates a long list of information including detailed
system and interface settings. It is therefore advisable to direct the output
to a file using any suitable output capture function provided with your
terminal emulation program.
EXAMPLE
Console#show tech-support
show system:
System Description : ECS3510-28T
System OID String : 1.3.6.1.4.1.259.10.1.27
System Information
System Up Time : 0 days, 0 hours, 52 minutes, and 2.21 seconds
System Name :
System Location :
System Contact :
MAC Address (Unit 1) : 00-E0-00-00-00-01
Web Server : Enabled
To Next Page
Loading...
Need help?
General
