ADDITIONAL LEGISLATION AND COMPLIANCE INFORMATION
RoHS (EU, UK): Material Exemption Information
This product is compliant with the following Exemptions
Annex III:
•6(a)-I Lead as an alloying element in steel for machining purposes containing up to 0,35 % lead by weight and in
batch hot dip galvanised steel components containing up to 0,2 % lead by weight
•6(b)-I Lead as an alloying element in aluminium containing up to 0,4 % lead by weight, provided it stems from lead
bearing aluminium scrap recycling
•6(c) Copper alloy containing up to 4 % lead by weight
•7(a) Lead in in high melting temperature type solder (i.e. lead based alloys containing 85% by weight or more
lead)
•7(c)-I Electrical and electronic components containing lead in a glass or ceramic other than dielectric ceramic in
capacitors, e.g. piezoelectronic devices, or in a glass or ceramic matrix compound
REACH (EU, UK)
This product is a complex article which is not designed for intentional substance release. To the best of our knowledge
the materials used comply with the requirements of REACH. The product manual provides information and instruction
to ensure the safe storage, use, maintenance and disposal of the product including any substance based requirements.
Article 33.1 Declaration:
This product contains Candidate List Substances of Very High Concern above 0.1%ww by article as clarified under the
2015 European Court of Justice ruling in case C-106/14.
• Lead (Pb)
This substance is present in certain steel / aluminium / brass components.
• Imidazolidine-2-thione
This substance is present in certain rubber components.
To Next Page
Loading...
Need help?
General
