DICOM 10-11
Name Description
Device
After you set the server (s) in DICOM Server Setting, the name
(s) will appear in the drop-down list, select the name of the
storage commitment server.
Service Name Default is xxx-SC, and it can be modified.
AE Title
Application Entity title, Here, it should be consistent with that of
the storage commitment server.
Port
DICOM communication port, 104 by default. Here, the port
should be consistent with that of the storage commitment server
port.
Maximum Retries Reserved feature.
Interval Time(s) Reserved feature.
Timeout
Value: 5ˉ60s, in increments of 5s, and 15 by default. After image
storage commitment is sent, the system will close the connection
with the server.
Associated Storage
Service
The associated storage server is preset before storage
commitment, only after the exam is sent out, can storage
commitment be created.
[Add] Add the DICOM service to the service list.
[Cancel] Click to cancel the parameter setting.
[Update]
Select an item in the service list, change the parameters in the
above area, and click [Update] to update the item in the service
list.
[Delete] Click to delete the selected service in the service list
[Default]
Select an item in the service list, click [Default] and you can see
!Y" in the Default column.
[Verify]
Click to verify if the two DICOM application entities are normally
connected.
[Exit] Click to exit the screen.
10.2 Verify Connectivity
If you want to verify connectivity (not a must), you can click [Verify] button on the pages of
DICOM Service screen respectively.
z If the verification succeeds, it will prompt !xxx Verify Succeed".
z Otherwise, it prompts !xxx Verify Failed".
If verification failed, the possible causes may be:
Note:
Not all the SCPs can support verification; please consult SCP belongings to confirm whether
SCP can support this service. If not, the verification won#t pass.
10.3 DICOM Service
If the system is configured with DICOM modules, and connected to the relevant DICOM
servers, after verifying connection, you can perform storage, print, Worklist, storage
commitment, and query/ retrieve applications.