Battery 13-3
To remove the battery:
1. Turn off the unit and detach the power cord from the main unit.
2. Open the battery cover.
3. Push the battery to left until it•s released.
4. Take out the battery from the bay.
13.4 Battery Status Indicator
The battery status indicator is located in the lower right corner of the screen, indicating the
battery capacity.
: indicates the battery capacity is empty.
: indicates the battery capacity is full.
When the power capacity is not enough, the system will pop up a prompt:
Warning! Battery is out of power! Please connect to power supply or system will be shut down
in one minute. Connect the power supply to afford normal work.
13.5 One Full Discharge / Charge Cycle
If the battery has not been used for over 2 months, you are recommended to perform one full
discharge / charge cycle. It is also recommended that the battery is stored in the shady and
cool area with FCC (full current capacity).
One Full Discharge / Charge Cycle:
1. Full discharge of the battery to let the system automatically shut down.
2. Charge the system to 100% FCC (full current capacity).
3. Discharge of the system for complete shutdown.
Battery cover
To Next Page
Loading...
Need help?
General
