Eickemeyer MAGIC 6000 - Linked Cine Review; Cine Memory; Cine Memory Setting; Cine Memory Clear

Display & Cine Review 6-5
Cine review operations are the same as those of 2D mode.
6.2.4 Linked Cine Review
The linked cine review refers to review of the images captured at the same moment.
There displays the frame mark
on the time mark of M image indicating the current 2D
image.
In dual or quad split display mode, you can only review images of the current active window,
use <Dual> or <Quad> to switch the window.
6.3 Cine Memory
6.3.1 Cine Memory Setting
There are 2 ways of cine memory split: auto and split.
Setting path: select "Auto" or "Split" for cine memory in [Preset]ൺ [System Preset]ൺ [Image
Preset].
Where,
z "Auto" for the cine memory indicates the system splits the cine memory as per the
number of B image windows.
z ಯSplitರ indicates the system always splits the cine memory, even if in the single-B
window, the system splits the cine memory into two as well. You can press <B> key
to switch and display the images in either memory, so you can compare images in
Split mode.
The memory capacity is evenly distributed as per splitting number, as shown in the following
table (Taking B images in low density as an example, the capacity of B cine memory is N
frames):
Imaging
Mode
Split
Single-B Dual Quad
Auto
One memory, with
capacity N frames.
The memory splits
into two, with
capacity N/2 frames
each
The memory splits
into four, with
capacity N/4 frames
each
Split
The memory splits
into two, with
capacity N/2
frames each
The memory splits
into two, with
capacity N/2 frames
each
The memory splits
into four, with
capacity N/4 frames
each
6.3.2 Cine Memory Clear
In the following conditions, the cine review memory will be cleared:
Time played Time in all
Start mark
End mark
Cursor