11-14 Setup
Click [Print Driver] page to enter printer driver setting screen:
h Display the printer name as well as print status.
h You can add printer including network printer.
h Check the printer attribute.
For details about DICOM print, please refer to !10 DICOM".
11.8 Network Preset
For local TCP/IP preset and DICOM preset, please refer to !10.1 DICOM Preset".
11.9 Workstation Setting
You can preset to send the image and measurement data to Workstation, which is an image
data management system.
Workstation Preset
Enter [Setup]-> [Workstation Setting] to set the IP Address and Port.
User-defined key Preset
Enter [Setup]-> [System Preset]-> [Key Config]-> [Other] to preset a user-defined key for
sending image and measurement data to the workstation. For details on key configuration,
see « 11.1.5 Key Config ».
11.10 Manage Settings
The Manage Settings page is used to import or export the setup data or restore factory setup
data.
11.10.1 Exporting Setup Data
This function is used to write all setup data of the system into a disk for backup. The format of
the data file is PDP.
To export some of preset data
1. Enter [Setup]-> [Manage Settings], select some items in the [Export] field on the left.
2. Click [Export] to open the [Export Data] screen.
3. Select the path to save the data.
4. Click [OK].
To export all preset data
Click [Export All], select the path to save the data.
11.10.2 Importing Setup Data
This function is used to import the existing setup data to the setup data memory of the system.
The system will reset and operate according to the setup preferences that were imported.
To import some of preset data
1. Enter [Setup]-> [Manage Settings], select an item in the Import field on the right.
To Next Page
Loading...
Need help?
General
