4-10 Exam Preparation
1. Saves the exam-related images, reports and measurement data, modifies the status as
ಯPausedರ.
2. Save the exam information, including report, imaging mode, exam mode, image
parameters, operation mode, imaging / measurement data and so on.
4.6.2 End an Exam
Before examining a new animal, press <End Exam> to end the exam of the previous animal,
update the animal ID and information, to avoid mixing data of the next new animal.
To end an exam, you can do one of the following:
z Press <End Exam> on the control panel.
z Click [New Animal] on the Animal Info screen to end the last animal exam and clear
the animal information.
z Click [New Exam] on the Animal Info screen (or iStation screen, or Review screen) to
end the last exam and clear the exam data.
To Next Page
Loading...
