Setup 11-1
11 Setup
The Setup function is designed to set the configuration parameters of operating the system
and maintaining user workflow setup data. The setup data of the user and system are stored
to the hard drive, and should be backed up to CD/DVD or USB memory devices.
CAUTION:
When the setup data is changed, be sure to save the preferences
according to the methods described in this chapter.:HDUH
not responsible for the loss of the setup data.
To enter Setup:
z Press the <Setup> to enter Setup;
z On probe& exam mode selection page, click [Exam Preset] to enter Exam Preset
page.
To exit Setup:
Selecting [Return] on the Setup menu, or press <Esc> to close the Setup menu, and the
parameter settings is saved.
If you change the system language and click [Return] on the Setup menu or press <Esc>,
the system will automatically restart to make the changing effective.
Basic operations
The commonly-used setting types are:
z Manually inputting: posit the cursor into the corresponding box, enter the desired
value through keyboard.
z Radio button: Click the button to select an item.
z Check box: click the check box to select one or several options.
z Drop-down list: click the arrow beside the list to select an item.
General buttons
z [OK]: click to confirm the setting, exit the current page and then return to the previous
page.
z [Cancel]: click to give up the setting, exit the current page and then return to the
previous page.
z [Load Factory]: click [Load Factory], and all parameter settings will be restored to the
original factory default.
To Next Page
Loading...
Need help?
General
