12-10 Probes and Biopsy
(For reference only)
12.1.6 Storage and Transportation
When all examinations for the day have been completed, confirm that the transducer is in
good condition.After disinfecting the transducer, confirm that the transducer is in good
condition and store it in a suitable place so that the next examination can be conducted
smoothly.
1. To prevent the transducer from being damaged, do not store it in locations where it may
be exposed to:
z Direct sunlight or X-rays
z Sudden changes in temperature
z Dust
z Excessive vibration
z Heat generators
2. Store and transport the transducer under following ambient conditions:
z Ambient temperature: -20°C ~ 55°C
z Relative humidity: 30% to 95% (no condensation)
z Atmospheric pressure: 700 hPa ~ 1060 hPa
3. When the transducer is sent to (,&.(0(<(5Customer Service Department or sales
representative for repair, be sure to disinfect it and keep it in the carrying case to prevent
infection.
4. Sterilize the carrying case as necessary.
12.2 Biopsy Guide
WARNING:
1.
The person performing biopsy procedures must
understand diagnostic ultrasound thoroughly and
have been trained adequately, otherwise, side effects
may be caused in the animal.
To Next Page
Loading...
Need help?
General
