Eickemeyer MAGIC 6000 - Biopsy Menu; Verify Biopsy Guide Line

Probes and Biopsy 12-23
CAUTION:
Ensure that all guide parts are seated properly prior to performing
a biopsy.
12.2.5 Biopsy Menu
Press <Biopsy> to show the biopsy menu.
 Select biopsy bracket angle
If the needle-guided bracket supports more than one biopsy angle, you can select the
angle from the drop-down list.
 Select Dot size
Move the cursor onto [Dot Size], press <Set> to select the dot size among Small, Medium
and Big.
Tips:
z The guide line is a dot line which consists of two kinds of dots, the distance between
two dots is depth dependent. Move the cursor onto the big dot, a numeral, which
represents the biopsy depth, is displayed.
z The biopsy guidezone adjusts along with image adjustments, such as image
inversion/rotations, zoom and depth changes.
z When the imaging depth and area are changed, the guide line will be adjusted.
 Display or hide the guide line
Set [Biopsy Kit] on the menu to !Off" to hide the guide line.
Or, press <Biopsy> on the control panel to display or hide the guide line.
 In B mode image menu, you can also display, hide or select the needle-guide bracket via
[Biopsy Kit] item.
12.2.6 Verify Biopsy Guide Line
WARNING:
1.
Prior to each biopsy procedure, be sure to verify the guide
line.
2.
If the needle is not consistent with the guide line, DO NOT
perform the biopsy procedure.