DICOM 10-15
Perform a second query; or,
Click [Show Detail] to view the animal information in details:
10.3.4 Storage Commitment
Storage commitment is used to make sure the images are successfully stored in the DICOM
server.
Before storage commitment, you should set a default storage commitment server.
Storage commitment after sending images on iStation screen
(1)
Open iSt
ation screen: press <iS
tation> or press <Patient> and click [iS
tation].
(2) Select an exam record (image (s) is/are stored in the exam record), click
to open the Send To dialogue box.
(3) Click to select !DICOM" in the !Target" box on the left side, then select the DICOM
storage server in the !Storage Server" box on the right side.
(4) Click [OK] to start sending. The system will send all the images stored in the exam
record to the storage server, meanwhile, it will send storage commitment to the
storage commitment server.
10.4 DICOM Media Storage
The system supports to save animal data to the external media in DCM format. Meanwhile, in
the system, you can view the saved DCM files from external media
Media storage:
1. Select animal record(s) in the iStation screen.
2. Click
, the following dialog box popped up:
3. Select the destination, and select DICOM format.
4. Set whether to remove animal exam data or only images from the local hard disk.
5. Click>%DFNXS@WREHJLQVWRUDJH
If the backup succeeded, there will be a tick marked in the Backup list in iStation screen;
otherwise, no tick is marked.
Tips: There should be no DICOMDIR/ DICMIMG/IHE_PDI files in the external storage
media of the same name with the one being backed up, otherwise, the backup
can!t proceed. Please make sure there is enough storage space; otherwise,
backup may fail due to space shortage.
To Next Page
Loading...
Need help?
General
