6-6 Display & Cine Review
z Start an exam of a new animal.
z Start a new exam for the same animal.
z Switching the probe (if the cine memory is split, only the cine memory corresponding
to the currently activated window is cleared)
z Changing the exam condition (if the cine memory is split, only the cine memory
corresponding to the currently activated window is cleared)
z Imaging Mode Switching: include imaging mode switching among B, M, display mode
switching etc.
z Parameters modification, including:
h Parameters that can result in imaging region or direction changing, such as
depth, FOV, trapezoid, steer, zoom and so on.
h Parameters that can result in image frame changing, such as line density, focus
number and so on.
h Change speed in M mode
h 2D image cleared
z Unfreeze the image: after the image is unfrozen, images stored in the cine memory
will be cleared, but if the cine memory is split, only the currently cine memory
corresponding to the activated window will be cleared.
z Open/ close the image file that occupies cine memory.
6.4 Preset
Open [Setup] ė[System Preset]ė[General] to preset the cine storage length.
Clip length: 1~60s.
To Next Page
Loading...
Need help?
General
