Setup 11-7
Type Function Description
Null To assign no function for a key.
Print (Print Service name)
Send to the specified printer (preset in
[Setup]-> [Print Preset])
Advanced
Features
Trapezoid imaging To turn on the trapezoid function.
Save Image Para To save image parameters.
Colorize Turn on/off colorize function
Dual Probe To enter dual probe state.
Other
Set Home To set home of comments.
Home
To make the cursor return to the home
position.
ABC Display To display/hide the comments.
iZoom To enter/ exit full-screen zoom status.
iVision To enter/ exit iVision.
Send to Workstation
Send image and measurement data to
the workstation
Other Settings
Item Description
Key Lightness To set the lightness for the keys: 0, 1, 2, 3.
Key Volume To set the key volume: 0-2, 0 means no sound.
Trackball Speed
To set the trackball speed when move the trackball: Slow,
Medium, Fast.
Trackball Lightness
To set the color for the trackball: White, Blue, Green, Pink,
Purple, Yellow.
11.1.6 Biopsy
Open the Biopsy page via [Setup]-> [System Preset]-> [Biopsy], as shown in the figure below.
Bracket
To select the default needle-guided bracket for the probe.
Parameter
Press to display the biopsy guideline.
11.1.7 Admin
Open the Admin page via [Setup]-> [System Preset]-> [Admin].
For details of access control, please refer to !9.7 Access Control".
11.2 Exam Preset
Open [Setup]-> [Exam Preset] or click [Exam Preset] in the !Probe & Exam" selection screen
to enter Exam Preset screen.
To Next Page
Loading...
Need help?
General
