Setup 11-13
5. Change position of the selected items: select an item on the right side box and click [Up],
[Down], [Left] or [Right] button to change the position of the item.
6. Delete comments:
z Remove item (from the library or user-defined) in the Selected Items list:
Select an item in Selected Items list, and click [<] to remove it to the Available Items list.
Click [<<] to remove all items in Selected Items.
z Delete a user-defined item in the Available Items box. You can only delete the user-
defined items rather than the items in the system library. After a user-defined item is
deleted, it will not be available.
Select a user-defined item in the Available Items box, and click [Delete]. After the
user-defined item in the Available Items box is deleted, the same item in the Selected
Items box on the right will disappear as well.
7. After you customize comments, click [OK] to confirm and exit the [Comment Preset]
screen.
11.7 Print Preset
The settings of a printer include print service and print driver.
z Print Service Setting
h Add Service: click to begin print service adding.
h Remove Service: click to delete the selected print service.
h Rename Service: click to rename the selected print service.
h Property: to preset the property of print services.
z Printer Driver Setting
Printers listed in the operator!s manual are all supported by the system, no drive is
required.
To Next Page
Loading...
