Bluetooth Analyzers
Page 156 of 264 | Display Filters
9.9 Instant Spectrum Display Filter
The
Instant Spectrum
View provides display filters for show/hide of Bluetooth inquiries, paging events, and
advertisements, and show/hide of Bluetooth idle traffic (ID, Null, Poll and empty packets). A flyover on any of
the filter selections describes its purpose.
Other filters are available to hide specific traffic types, raw power spectrum indications, and statistics bars
located on the right side of the
Instant Spectrum
pane.
These filters are available from the
Instant Spectrum
tool bar.
To enable any of the filters in the Instant Timing pane:
1. Select the Display button or other applicable traffic type button as shown below on the tool bar.
9.10 Overview Keep-Only Filter
The Overviews provide a convenient right-click Keep-Only filter that enables the user to keep only the
communicating devices shown on the line selected. All other communications are hidden. This filter affects all
panes.
To enable an Overview Keep-Only filter:
1. Select the desired Overview.
2. Select the line desired in the Overview.
To Next Page
Loading...
Need help?
General
