Frequently Asked Questions | Page 255 of 264
Q. My Wi-Fi capture is not decrypted.
A. The software needs to see the Wi-Fi association in order to decrypt the encrypted traffic. The proper
sequence would be to have the Wi-Fi client disconnected, start the capture, connect the Wi-Fi client, do the
desired data exchange, then stop the capture. Be sure to enter the passkey as well (this is done using the Wi-
Fi Security button, located on the toolbar of the Wi-Fi Overview).
Q. Can I request a feature addition?
A. Yes, please feel free to open a dialog with Ellisys on such requests. Contact us at support@ellisys.com
.
To Next Page
Loading...
Need help?
General
