Emerson FloBoss 107 User Manual

FB107 LCD User Manual
3-20 Using the Touchpad Issued Sep-07
Note: A blinking a in the upper right corner of a run box (as in
Run 2 in Figure 3-36) indicates an active alarm.
2. Touch a meter run. A parameter screen for the meter run displays.
Figure 3-37. Meter Run Parameters
3. Touch Exit to display the Meter Run menu.
4. Touch Exit to display the Modules menu.
3.5.6 Viewing System Information
Use the SysAI option on the Modules menu to view the following
information on the FB107’s battery, charging status, and board
temperature.
Battery Charging Board Temperature
 Volts
 Alarms
 Low Volts
 High Volts
 A/D Counts
 Volts
 Alarms
 Low Volts
 High Volts
 A/D Counts
 Degrees
 Alarms
 Low Degrees
 High Degrees
 A/D Counts
1. Touch SysAi on the Modules menu. The System AI menu displays.
Figure 3-38. System AI Menu
2. Touch an option. A parameters screen displays.

Emerson FloBoss 107 Specifications

General

Brand	Emerson
Model	FloBoss 107
Category	Controller
Language	English