FB107 LCD User Manual
Issued Sep-07 Introduction 1-1
Chapter 1 – Introduction
This chapter describes the structure of this manual and presents an
overview of the Liquid Crystal Display (LCD) for the FloBoss
™
107
Flow Manager.
1.1 Scope and Organization
This document serves as the user manual for the FloBoss
™
107 Flow
Manager Liquid Crystal Display (LCD), which is intended for use with
the FloBoss 107 Flow Manager (“FB107”). This manual describes how
to install, configure, and use the FB107 LCD (the “Touchpad”). You
initially access and configure the Touchpad using ROCLINK™ 800
Configuration software loaded on an IBM-compatible personal
computer running Windows
®
98, NT 4.0 (with Service Pack 6), 2000
(with Service Pack 2), or XP. Once configured, the Touchpad provides
access to many FB107 system parameters and functions.
The chapters in this manual provide information in a sequence
appropriate for first-time users. Once you become familiar with the
device and the procedures, the manual becomes a reference tool.
This manual has the following major sections:
Chapter 1 – Introduction
Chapter 2 – Configuration
Chapter 3 – Using the Touchpad
This manual assumes that you are familiar with the FB107 and its
configuration. For more information, refer to the following specification
sheet and manuals:
FloBoss
™
107 Flow Manager Instruction Manual (Form A6206)
FloBoss
™
107 LCD Specification Sheet (5.5:LCD)
ROCLINK 800 Configuration Software User Manual (for FB107)
(Form A6217)
1.2 Overview
The Touchpad enables you to access FB107 process and operational
information and to view and change FB107 parameters. The Touchpad
is a touch-sensitive liquid crystal display (LCD) screen. It fits behind a
protective covering that is mounted to an enclosure (see Figure 1-1).
To Next Page
Loading...
Need help?
General
