Emerson FloBoss 107 - Performing a Warm Start; Forcing End of Day; Idle State Display

FB107 LCD User Manual
3-36 Using the Touchpad Issued Sep-07
3.8.3 Performing a Warm Start
Use this option to warm start the system from the Touchpad.
1. Touch Warm Start on the System menu. The Warm Start menu
displays.
Figure 3-72. Warm Start Menu
2. Touch Yes. The Touchpad displays a confirmation message.
Figure 3-73. Confirmation Message
3. When the warm start completes, the Touchpad displays the default
idle state display.
Figure 3-74. Idle State Display
Note: After a warm start, you must log onto the Touchpad again.
3.8.4 Forcing End of Day
Use this option to force end-of-day processing from the Touchpad.