Emerson unidrive sp User Manual

Menu 20
Parameter
structure
Keypad and
display
Parameter
x.00
Parameter
description format
Advanced parameter
descriptions
Macros
Serial comms
protocol
Electronic
nameplate
Performance RFC mode
356 Unidrive SP Advanced User Guide
www.controltechniques.com Issue Number: 10
5.20 Menu 20: Application menu 3
Menu 20 contains parameters that do not affect the operation of the drive. These general purpose parameters are intended for use with fieldbus and
application Solutions Modules. The read write parameters in this menu cannot be saved in the drive.
*Menu 20 parameters are non-clonable and cannot be saved in a full parameter type data block or difference from default data block on a SMART
card with software versions before V01.07.00. However, with V01.07.00 onwards these parameters are saved in a difference from defaults type data
block if they are not at their default value.
20.01 to 20.20 Application menu 3 read-write integer
Drive modes Open-loop, Closed-loop vector, Servo, Regen
Coding
Bit SP FI DE Txt VM DP ND RA NC NV PT US RW BU PS
1* 1
Range
Open-loop, Closed-loop vector, Servo,
Regen
-32,768 to 32,767
Default
Open-loop, Closed-loop vector, Servo,
Regen
0
Update rate N/A
20.21 to 20.40 Application menu 3 read-write long integer
Drive modes Open-loop, Closed-loop vector, Servo, Regen
Coding
Bit SP FI DE Txt VM DP ND RA NC NV PT US RW BU PS
1* 1
Range
Open-loop, Closed-loop vector, Servo,
Regen
-2
31
to 2
31
-1
Default
Open-loop, Closed-loop vector, Servo,
Regen
0
Update rate N/A

Emerson unidrive sp Specifications

General

Type	AC Drive
Storage Temperature	-40°C to +70°C
Communication Options	CANopen, Ethernet, Profibus, DeviceNet
Safety Features	Safe Torque Off (STO), Safe Stop 1 (SS1), Safe Operating Stop (SOS)
Overload	150% for 60 seconds
Enclosure	IP20
Output Voltage Range	0 - Input Voltage
Protection Features	Overcurrent, Overvoltage, Undervoltage, Short Circuit
Humidity	95% non-condensing
Cooling Method	Fan cooled
Dimensions	Varies depending on the power rating and enclosure type
Weight	Varies depending on the power rating and enclosure type
Input Voltage	200 VAC - 690 VAC ±10%