Emerson Vilter MicroVission User Manual

Section 9 • Event List
9 – 1
MicroVission Controller • Operation and Service Manual • Emerson • 35391MV 1.3
Overview
The Event List screen is designed to display the list of all
compressor events are arranged in chronological order
with the latest event appearing at the top. The infor-
mation available on the screen helps operator to un-
derstand the operation of the compressor and trouble-
shooting. This screen is divided into four columns and
can list up to 128 separate events. The operator can also
download the information on the event list through the
Data Backup Screen.
Event List Columns
• Date: Displays the date of the event in MM/DD/
YYYY format.
• Time: Displays the time of the event in HH:MM:SS
format. The time data displays AM/PM informa-
tion when 12-hour format is congured in the
Conguration screen.
• Event Type: Displays the type of message for a list-
ing. The common event types are “Start”, “Stop”,
“Trip”, “Inhibit”, “Alarm”, “Info”, and “System”.
These helps the operator to understand the mean-
ing of the “Message” column.
• Message: The information that describes the event.
The operator can use “Update” button to refresh the
event list data when this screen is open, instead of exit-
ing the screen and re-entering to see the latest events
data.
Figure 9-1. Event List Screen

Emerson Vilter MicroVission Specifications

General

Brand	Emerson
Model	Vilter MicroVission
Category	Controller
Language	English