Emerson Vilter MicroVission - Virtual Digital Inputs; Virtual Analog Inputs

Section 12 • Configuration Screen
12 – 12
MicroVission Controller • Operation and Service Manual • Emerson • 35391MV 1.3
Virtual Digital Inputs
The MicroVission has several Virtual Digital Inputs for
which the operator can choose the use. Once an input
is enabled the Auxiliary I/O screen will be available from
the menu screen where the operator can further dene
the input’s operation. The Virtual Digital can be written
from Modbus TCP/ Modbus RTU starting from address
1000 to 1004.
Enable Input #:
Enables the selected virtual digital input.
Set Name:
Allows the operator to assign a name to the virtual input.
Virtual Analog Inputs
The MicroVission has several Virtual Analog Inputs for
which the operator can choose the use. Once an input
is enabled the Auxiliary I/O screen will be available from
the input’s operation. The Virtual Digital can be written
from Modbus TCP/ Modbus RTU starting from address
1005 to 1009.
Enable Input #:
Enables the selected analog input.
Set Name:
Allows the operator to assign a name to the input.
Figure 12-8. Conguration Screen – Virtual Analog and Virtual Digital Inputs Conguration