Emerson Vilter MicroVission - Digital Inputs; Analog Inputs; Digital Outputs; Analog Outputs

Section 12 • Configuration Screen
12 – 10
MicroVission Controller • Operation and Service Manual • Emerson • 35391MV 1.3
Digital Inputs
The MicroVission has several Digital Inputs for which the
operator can choose the use. Once an input is enabled
the Auxiliary I/O screen will be available from the menu
screen where the operator can further dene the input’s
operation.
Enable Input #:
Enables the selected digital input.
Set Name:
Allows the operator to assign a name to the input.
Analog Inputs
The MicroVission has several Analog Inputs for which the
operator can choose the use. Once an input is enabled
the Auxiliary I/O screen will be available from the input’s
operation.
Enable Input #:
Enables the selected analog input.
Set Name:
Allows the operator to assign a name to the input.
Digital Outputs
The MicroVission has several Digital Outputs for which
the operator can choose the use. Once an output is en-
abled the Auxiliary I/O screen will be available from the
menu screen where the operator can further dene the
output’s operation.
Enable Output #:
Enables the selected digital Output.
Set Name:
Allows the operator to assign a name to the output.
Analog Outputs
The MicroVission has several Analog Outputs for which
the operator can choose the use. Once an Output is en-
abled the Auxiliary I/O screen will be available from the
Output’s operation.
Enable Output #:
Enables the selected analog output.
Set Name:
Allows the operator to assign a name to the output.
Figure 12-6. Conguration Screen – Aux Analog and Aux Digital Inputs Conguration