Emerson Vilter MicroVission - Notes Tab

14 – 6
Section 14 • Maintenance Screen
MicroVission Controller • Operation and Service Manual • Emerson • 35391MV 1.3
Notes Tab
• The Notes tab allows the operator to make notes
for any personnel who might have access to the
MicroVission. Refer to Figure 14-9.
• Top entry eld to the left of “Add Line” button is pro-
vided to add new line in maintenance notes. The op-
erator need to click on this entry eld and write notes
and then press on “Add Line” button to add new line
in maintenance notes.
• Bottom entry eld to the left of “Edit Line” button is
provided to edit existing line in maintenance notes.
The operator need to click on the line to be edited
and then click on this entry eld and write notes and
then press on “Edit Line” button to modify mainte-
nance notes.
Figure 14-9. Maintenance Screen – Notes
Delete
Delete button in Notes tab allows the operator to delete
the selected line in maintenance notes.
Clear All
The Clear All button in the Notes tab allows the operator
to clear all existing maintenance notes.