Emerson Vilter MicroVission - Delete Device

19 – 7
Section 19 • Compressor Sequencing
MicroVission Controller • Operation and Service Manual • Emerson • 35391MV 1.3
Delete Device
This popup is displayed when the Delete Device button
is clicked in the Device List Screen. Other Compressors
can be removed from the sequencing network by the
any of the Compressor from this screen, as shown in
Figure 19-6 and 19-7. After deleting the compressor, the
deleted compressor will be reset to its own compressor
entry in the device list.
Figure 19-6. Compressor Sequencing Screen – Conrm Delete Device
Ok:
This button allows the deletion of a selected Compressor
from the Sequencing Network.
Cancel:
This button cancels the deletion of a selected Compressor
from the Sequencing Network.