BA02195C OXY5500 Optical Oxygen Analyzer
Endress+Hauser B
–3
3. Lift the fuse cover off and turn it over. The fuse is held in the slot in
the cover.
4. Remove the fuse from the fuse cover. Refer to Figure B–2.
5. Replace the expired fuse with a new fuse.
6. Turn the fuse cover over (fuse side down) and place onto the fuse
enclosure.
7. Snap fuse cover onto fuse enclosure
.
Use only the same type and rating of fuse for replacements. Refer
to the specifications listed in Table B–1.
Figure B–1 Removing the fuse cover
FUSE COVER
FUSE
ENCLOSURE
Figure B–2 Removing the fuse
To Next Page
Loading...
