Endress+Hauser OXY5500 - Page 55

BA02195C OXY5500 Optical Oxygen Analyzer
Endress+Hauser 4
–25
• Press to create a new measurement file. A keyboard screen
displays to enter the new measurement file name. Refer to Figure
4–27.
a. Use the buttons to move across the keyboard
and the button to select the respective letter or number.
The new measurement name will show in the highlighted box at
the bottom of the screen.
b. Finish typing the file name, press the Done
button and .
The new measurement file will display in the file list.
c. To select a newly created measurement file for data storage,
press a second time. The screen will switch back to the
measurement settings automatically.
d. Press
to save the changes and return to the MAIN MENU
screen.
To return to the measurement file list without creating a new file,
press the button.
Figure 4–27 Keyboard screen to enter
measurement name