Endress+Hauser Proline Promag H 300 - Page 118

Commissioning Proline Promag H 300 PROFINET
118 Endress+Hauser
WLAN mode
→  118
SSID name
→  118
Network security
→  118
Security identification
→  118
User name
→  118
WLAN password
→  119
WLAN IP address
→  119
WLAN MAC address
WLAN passphrase
→  119
WLAN MAC address
Assign SSID name
→  119
SSID name
→  119
Connection state
→  119
Received signal strength
→  119
Parameter overview with brief description
Parameter Prerequisite Description Selection / User
entry / User
interface
Factory setting
WLAN – Switch WLAN on and off. • Disable
• Enable
Enable
WLAN mode – Select WLAN mode. • WLAN access
point
• WLAN Client
WLAN access point
SSID name The client is activated. Enter the user-defined SSID
name (max. 32 characters).
– –
Network security – Select the security type of the
WLAN network.
• Unsecured
• WPA2-PSK
• EAP-PEAP with
MSCHAPv2
*
• EAP-PEAP
MSCHAPv2 no
server authentic.
*
• EAP-TLS
*
WPA2-PSK
Security identification – Select security settings and
download these settings via
menu Data management >
Security > WLAN.
• Trusted issuer
certificate
• Device certificate
• Device private key
–
User name – Enter user name. – –