Endress+Hauser Proline Promag H 300 - Page 121

Proline Promag H 300 PROFINET Commissioning
Endress+Hauser 121
Navigation
"Setup" menu → Advanced setup → Administration
‣
Administration
‣
Define access code
→  121
‣
Reset access code
→  121
Device reset
→  122
Using the parameter to define the access code
Navigation
"Setup" menu → Advanced setup → Administration → Define access code
‣
Define access code
Define access code
→  121
Confirm access code
→  121
Parameter overview with brief description
Parameter Description User entry
Define access code Restrict write-access to parameters to protect the configuration
of the device against unintentional changes.
Max. 16-digit character string comprising
numbers, letters and special characters
Confirm access code Confirm the entered access code. Max. 16-digit character string comprising
numbers, letters and special characters
Using the parameter to reset the access code
Navigation
"Setup" menu → Advanced setup → Administration → Reset access code
‣
Reset access code
Operating time
→  122
Reset access code
→  122