Endress+Hauser Proline Promag W 800 - Page 25

Proline Promag W 800 Mounting procedure
Endress+Hauser 25
Installation in event of pipe vibrations
NOTICE
Pipe vibrations can damage the device!
‣
Do not expose the device to strong vibrations.
‣
Support the pipe and fix it in place.
‣
Support the device and fix it in place.
L > 10 m (33 ft)
A0041092
Information on the measuring system's resistance to vibration and shock →  106
Orientation
The direction of the arrow on the nameplate helps you to install the measuring device
according to the flow direction (direction of medium flow through the piping).
Orientation Recommendation
Vertical orientation
A0015591
Horizontal orientation, transmitter at top
A0015589
1)