Entec ETMFC610 - Page 173

Multi-Function Control ETMFC610 http://www.entecene.co.kr
163
EN
HANCED
TEC
HNOLOGY
GLOBAL SETTING/ COMMUNICATION/ PROTOCOLS/ MULTI-BIT / CRC Error Cnt
Range
1 ~ 100
Default
10
Step
1
Set the CRC Error Count. If CRC error is received by this count, it is
detected as CRC error.
GLOBAL SETTING/ COMMUNICATION/ PROTOCOLS/ MULTI-BIT / Rx Error Cnt
Range
1 ~ 100
Default
10
Step
1
Set the Reception Error Count. If the received data is equal to this
count, it is detected as reception error.
[
MULTI
-
BIT A
]
>Link Timeout: 15
>RMB Debounce: 10
>ID Error Cnt: 10
>CRC Error Cnt: 10
>Rx Error Cnt:
10
[ 1~100: 1 ]
[
MULTI
-
BIT A
]
>Link Timeout: 15
>RMB Debounce: 10
>ID Error Cnt: 10
>CRC Error Cnt: 10
>Rx Error Cnt:
10
[ 1~100: 1 ]