Entec EVRC2A-N6-NT - Page 39

RECLOSER CONTROL EVRC2A-N6,NT http://www.entecene.co.kr
29
ENHANCED TECHNOLOGY
3.1.5. Sequence Status Section
Indicates the current status of programmed sequence procedure.
RESET : Sequence shows resetting
CYCLE : Sequence shows running
LOCKOUT : Sequence shows lockout
Figure 3-6. Sequence Status Section
3.1.6. System Diagnostic Section
Indicates Diagnostic status of the EVRC2A. Control run indicates (green) the EVRC2A has
successfully passed its internal diagnostic test. Self Check (Red) indicates the EVRC2A has failed
in its internal diagnostic test.
CONTROL RUN
Status of EVRC2A systems shows normal
SELF CHECK
Status of EVRC2A systems shows warning
Figure 3-7. System Diagnostic Section
NOTE :
Control Run LED is blinking when system functional status is normal.