Entec EVRC2A-N6-NT - Page 42

RECLOSER CONTROL EVRC2A-N6,NT http://www.entecene.co.kr
32
ENHANCED TECHNOLOGY
[FUN] Key
Press [FUN] key to enter Main menu for displaying information or changing settings. [FUN] key
is also used to display a help message in setting change mode and to cancel the help message
display.
[ESC] Key
The ESC key can be used to cancel data input mode and return to the previous menu.
[ENT] Key
ENT key is used to select a menu by using Up and Down arrow key. Enter key is also used to
accept a new setting by using Up or down arrow key.
[◀] [▶] Key
Use the left and right arrow keys to move cursor in the data input mode and change display
message.
[▲] [▼] Key
Use Up and Down arrow keys to move through the various menus and to decrease or increase
value in the data input mode.
PORT1
PORT1 is the port to communicate whit an Interface Software. Communication frame between
EVRC2A and a master can be monitored and saved by using “DNP Frame Monitor” menu of the
Interface Software.