Enterasys Matrix-V V2H124-24 - Page 56

Configuring the Switch
3-6
3
Enterasys 3-110
CDP Cabletron Discovery Protocol home page 3-110
Global Settings Configures global CDP settings 3-110
Port Settings Configures CDP settings on a per port basis 3-112
Neighbors Information Displays information on neighboring CDP-aware devices 3-113
Port Information Displays information on CDP network traffic activity 3-115
PoE* 3-116
Power Status* Displays the status of global power parameters 3-116
Power Config* Configures the power budget for the switch 3-117
Power Port Status* Displays the status of port power parameters 3-118
Power Port Config* Configures port power parameters 3-119
Address Table 3-120
Static Addresses Displays entries for interface, address or VLAN 3-120
Dynamic Addresses Displays or edits static entries in the Address Table 3-121
Address Aging Sets timeout for dynamically learned entries 3-122
Spanning Tree 3-123
STA
Information Displays STA values used for the bridge 3-123
Configuration Configures global bridge settings for STA 3-123
Port Information Displays individual port settings for STA 3-131
Trunk Information Displays individual trunk settings for STA 3-131
Port Configuration Configures individual port settings for STA 3-135
Trunk Configuration Configures individual trunk settings for STA 3-135
MSTP
VLAN Configuration Configures priority and VLANs for a spanning tree instance 3-137
Port Information Displays port settings for a specified MST instance 3-140
Trunk Information Displays trunk settings for a specified MST instance 3-140
Port Configuration Configures port settings for a specified MST instance 3-142
Trunk Configuration Configures trunk settings for a specified MST instance 3-142
VLAN 3-144
802.1Q VLAN 3-144
GVRP Status Enables GVRP VLAN registration protocol 3-147
Table 3-2. Switch Main Menu (Continued)
Menu Description Page