Product description
Eppendorf Xplorer
®
/Eppendorf Xplorer
®
plus
English (EN)
15
3.2 Main illustration – multi-channel pipette
For a description of the upper part, refer to the
main illustration of the single-channel pipette.
1 Lever
The lever is used to release the multi-channel lower
part.
2 Multi-channel lower part
The multi-channel lower part is freely rotatable. It
is not detached when rotated. The outer channels
are marked with the numbers 1 and 8 (or 12).
The multi-channel version has a piston for each
channel so that less than 8 or 12 tips can also be
mounted.
You can open the multi-channel lower part in order
to exchange or remove individual channels.
The multi-channel lower part is autoclavable.
3 Latches, right and left
To release the cover plate with the interior ejector
rail.
The 1 200 µL multi-channel lower part can be
opened with a pin.
4 Tip cones with spring-loading action
The spring-loading action optimizes the force
required for attaching and ejecting tips. The
spring-loading action is present for the 10 µL,
100 µL and 300 µL pipettes.
5 Pipette tips
We recommend epT.I.P.S.
6 Cover plate for 10 µL, 100 µL and 300 µL
Removable cover plate with internal ejector rail.
The cover plate is opposite the side with the lever.
6
1
2
3
4
5
To Next Page
Loading...
