Eppendorf Xplorer - Dispensing Speeds

84
Technical data
Eppendorf Xplorer
®
/Eppendorf Xplorer
®
plus
English (EN)
8.5 Dispensing speeds
The following tables show the minimum duration required for the aspiration of the
nominal volume at different speed levels. The actual duration may be longer. It depends,
among other things, on the viscosity of the liquid, the ambient pressure, the temperature,
or the tip opening. The dispensing speeds apply to single-channel pipettes and
multi-channel pipettes from software version 2.06.00 upwards.
8.5.1 Single-channel pipettes
8.5.2 Multi-channel pipettes
Nominal volume
Speed
level
10 μL 100 μL 300 μL 1000 μL 5 mL 10 mL
1 12.0 s 12.0 s 12.0 s 12.0 s 12.0 s 12.0 s
2 8.0 s 8.0 s 8.0 s 8.0 s 8.0 s 8.0 s
3 4.0 s 4.0 s 4.0 s 4.0 s 6.0 s 6.0 s
4 2.8 s 2.8 s 2.8 s 2.8 s 4.8 s 4.8 s
5 2.2 s 2.2 s 2.2 s 2.2 s 3.6 s 3.6 s
6 1.6 s 1.6 s 1.6 s 1.6 s 3.2 s 3.2 s
7 1.2 s 1.2 s 1.2 s 1.2 s 2.8 s 2.8 s
8 0.9 s 0.9 s 0.9 s 0.9 s 2.6 s 2.6 s
Nominal volume
Speed level 10 μL 100 μL 300 μL 1200 μL
1 12.0 s 12.0 s 12.0 s 12.0 s
2 8.0 s 8.0 s 8.0 s 8.0 s
3 4.0 s 4.0 s 4.0 s 4.0 s
4 2.8 s 2.8 s 2.8 s 2.8 s
5 2.2 s 2.2 s 2.2 s 2.2 s
6 1.6 s 1.6 s 1.6 s 1.6 s
7 1.2 s 1.2 s 1.2 s 1.2 s
8 0.9 s 0.9 s 0.9 s 1.0 s