Operation
Eppendorf Xplorer
®
/Eppendorf Xplorer
®
plus
English (EN)
59
5.19.10 Language – setting the language
Mark a language in the selection list using the rocker.
The selected language is only activated after the completion of the language selection.
5.19.11 Personalization – personalizing the pipette
You can use the rocker to select letters and numbers to personalize the pipette. The
selected personalization will be displayed after the pipette has been activated from sleep
mode or after the reset. When the pipette is delivered, it is personalized as My Xplorer.
5.19.12 Service – calling up service functions
The options listed here are not needed during normal routine use.
A selection list offers the following service options:
• Software version: Displays the current software version.
• Parameter ver.: Displays the applicable data record for this pipette. The data record is
different for the various volumes.
• Initial reset: After a security query, the pipette will be reset to factory settings and all
entries will be reset to the "default values". This type of reset may be useful when
transferring the pipette to another workstation.
• Check procedure: For service personnel only.
• Software update: For service personnel only.
• USB: For service personnel only.
5.19.13 Activating the Service interval (Xplorer plus)
If the Service interval option is activated, the pipette will remind you about the required
maintenance or repeating the gravimetric test. You can set the reminder for a specific
time or after a specific number of cycles.
The display shows the following options after Time interval or Cycles interval has been
selected:
• Last service
• Next service
• Set interval
• Reset
When selecting a language, the softkeys and the language selection list are
always in English. This makes it easier to return to the desired language if you
select an unknown language by mistake.
To Next Page
Loading...
