Eppendorf Xplorer - Cleaning and disinfecting

66
Maintenance
Eppendorf Xplorer
®
/Eppendorf Xplorer
®
plus
English (EN)
7.2 Cleaning
7.2.1 Cleaning and disinfecting the pipette
All single and multi-channel lower parts are wear parts. Clean them after contamination,
use of aggressive chemicals and/or heavy stress. If the lower parts are worn or damaged,
replace these parts.
1. Moisten a cloth with a cleaning agent and a decontamination agent.
2. Remove external contamination.
3. Moisten a new cloth with water.
4. Wipe down the housing.
NOTICE! Damage to device from unsuitable cleaning fluids or sharp or
pointed objects.
Unsuitable cleaning agents can damage the device.
 Never use corrosive cleaning agents, strong solvents or abrasive polishes.
 Check the compatibility with the materials used.
 Please note the information on chemical resistance.
 Do not clean the device with acetone or organic solvents with a similar effect.
 Do not clean the device with sharp objects.
NOTICE! Damage to the device due to penetration of liquids.
 Do not set the pipette aside when the pipette tip is filled.
 Do not allow any liquids to penetrate the inside of the housing.