Eppendorf Xplorer - Installation; Mains;power supply device assembly; Connecting the Lithium-polymer rechargeable battery

Installation
Eppendorf Xplorer
®
/Eppendorf Xplorer
®
plus
English (EN)
21
4 Installation
4.1 Mains/power supply device assembly
 Insert the power plug adapter required for your mains/power supply into the opening
of the mains/power supply device. If there is any doubt as to which power plug adapter
should be used for the power supply unit, you should consult an electrician.
4.2 Connecting the Lithium-polymer rechargeable battery
The lithium polymer battery is already inserted in the battery compartment upon delivery.
1 Power plug adapters
a EU
b United Kingdom
c USA
d Australia
2 Mains/power supply device
3 Charging plug
1. Open the rechargeable battery
compartment cover.
3