50
Operation
Eppendorf Xplorer
®
/Eppendorf Xplorer
®
plus
English (EN)
5.17.1 Pswrd. protection
You can protect the Edit mode using a four-digit, numerical password. This prevents
stored programs and pipettings from being changed. The passwords for the Edit mode
and Adjustment option may vary. The password can be changed or deactivated after it has
been entered. If you lose your password, please contact your local Eppendorf distribution
partner to obtain a temporary password (Master key). Keep the pipette at hand when you
make the call.
1. Press the rocker upward to activate the password protection.
ON appears in the display.
2. Press the Select softkey.
3. Use the rocker to select the digit.
4. Press the Next softkey to switch to the next field.
5. Enter data in all of the fields.
6. Press the Save softkey to save the password.
7. Reenter the password after completing the saving procedure. Press the Enter softkey.
Password protection is now active.
5.17.2 Creating or changing Fixed volume
Creating a new pipetting
1. Select the New fixed volume entry using the rocker.
The parameters of the most recently used pipetting will be displayed when the New
fixed volume entry is opened. Up to 10 fixed volumes can be saved.
2. Press the Edit softkey.
3. Change the parameters as you did in the Pipetting mode.
4. Press the Save softkey.
The saved pipetting now appears in the Fixed volumes (Fix) operating mode with
dispensing volume, aspiration speed and dispensing speed.
Changing saved pipettings
1. Select the pipetting using the rocker.
2. Press the Select softkey.
3. Select the Edit option.
4. Press the Select softkey.
If you lose the password for the Edit mode, you will not be able to change any
programs or pipettings with fixed volume.
To Next Page
Loading...
