Maintenance
Eppendorf Xplorer
®
/Eppendorf Xplorer
®
plus
English (EN)
71
7.5.1.3 Deactivating the spring-loading action of multi-channel pipettes
The spring-loading action of the tip cones can be deactivated in the 10 µL, 100 µL and
300 µL multi-channel lower parts by installing 2 – 3 locking clips. The locking clips are
part of the delivery package.
Prerequisites
• The multi-channel lower part is open and has been removed from the upper part.
• The channels have been removed.
1. Remove the spring from the channels.
2. Insert the channels without springs.
3. Firmly press the locking clips onto the
channels.
4. Assemble the pipette.
To Next Page
Loading...
