74
Maintenance
Eppendorf Xplorer
®
/Eppendorf Xplorer
®
plus
English (EN)
The lower part consists of the following:
Assembly is performed in reverse order. Make sure that the magnet on the piston in the
lower part is coupled with the magnet on the spindle in the upper part. After the
assembly:
Carry out a gravimetric test of the systematic and random errors.
This test ensures that no parts were confused during assembly and that the pipette has
been assembled correctly.
1 Upper part of the lower part
2 Piston (with seal)
Piston with magnet
3 Cylinder and tip cone
For replacing an ejector sleeve, the 5 mL and 10 mL sizes are delivered with an
ejector sleeve and ejector carrier. The lower part must be removed in order to
install a new ejector carrier.
1
2
3
To Next Page
Loading...
