Epson C8-B - Page 258

C8-B/C12-B Service Manual Maintenance Disclosure Scope: Maintenance Trained Personnel Only
(C) Seiko Epson Corporation 2-216 Rev.1
3. Secure the Brake Hub with set screws.
Install the Motor Pulley.
POINT
• Align the D-cut surfaces with the screw holes, and install the Motor Pulley.
• Install the bushing on the side without the D-cut.
• Tighten the screws while pressing the Motor Pulley against the Brake Hub.
A
S05: 2-M4x4
(1.6 +/- 0.1 N⋅m)
Brake Hub
4
A
S05: 2-M4x4
(1.6 +/- 0.1 N⋅m)
Motor Pulley
D-cut surface
Bushing
Brake Hub
Motor Unit Assembly
4
3
2
1