Epson C8-B - Page 27

C8-B/C12-B Service Manual Maintenance Information Disclosure Scope: Maintenance Trained Personnel Only
(C) Seiko Epson Corporation 1-21 Rev.1
Attach the grease nipple to the Joint #4 grease inlet.
CAUTION
The grease plug attaching hole located near the label with “4” printed is the Joint #4
grease inlet.
The grease inlet position differs depending on the model. Carefully identify the correct
position.
Inject grease from the grease nipple using a grease gun.
SK-1A: 2 g
Remove the grease nipple from the Joint #4 grease inlet.
2
3
Grease Gun
4