5. If a used cartridge is installed, grasp the cartridge and pull it
slightly forward and up; the ribbon guide snaps away from
the metal pins behind the print head. Properly dispose of
the used ribbon cartridge.
6. Remove the new ribbon cartridge from the package. Remove
the separator from the middle of the ribbon cartridge and
discard the separator. Then turn the ribbon-tightening knob
in the direction of the arrow to remove any slack in the
ribbon.
ribbon guide
new02
separator
ribbon-tightening knob
1-4
L
Sun-G+ Rev.C
A5 size Chapter 1
97/11/14 pass 0
1-8 Setting Up the Printer
To Next Page
Loading...
