SC-F2000 Revision C
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 71
Confidential
3.4.2.3 ANTI-DRYING CAP
1. Unlock the CR UNIT. (p69)
2. Open the PRINTER COVER.
3. Push the lever toward you, and remove the ANTI-DRYING CAP while holding up
it.
Figure 3-13. Removing the ANTI-DRYING CAP
3.4.2.4 PLATEN
1. Move the PLATEN toward you.
2. Hold the both sides of the PLATEN, and remove it upward.
Figure 3-14. Removing the PLATEN
To Next Page
Loading...
