EPSON Stylus COLOR 440, 640, and 740 Chapter 3 Troubleshooting
70
Table 3-3. LED Indicators and Printer Status
Error Status
Indicators
Recovery
Power
Ink out
(Black)
Ink Out
(Color)
Paper Out
Paper out Blinking — — On
Load additional paper and press the
load/eject button.
Paper jam — — — Blinking
Remove the paper, then press the
load/eject button.
No ink cartridge or
ink end (black)
—On——
Insert a new black ink cartridge and press
the load/eject button for 3 seconds.
No ink cartridge or
ink end (color)
— — On —
Insert a new black ink cartridge and press
the load/eject button for 3 seconds.
Maintenance
request
Blinking Blinking Blinking Blinking
Change the waste ink drain pad and reset
the EEPROM.
Fatal error Blinking On On Blinking
Turn the printer off and then on again. If the
printer does not recover, repair the
malfunctioning part.