Page 102 of 159
12 Patients
The ‘ELite 5’ analyzer allows the operator to define and store patients in the patient database
during manual measurement. Patients can also be predefined while creating a list for one of
the automatic processing modes.
Select the Patients icon on the main menu to display the Patients panel.
Figure 74. Patients Panel
The Patients panel displays patient information in the familiar table format of the ’ELite 5’
analyzer database, and operates the same way as the database panel. Use the ’New’
function to define new patient, and ’Edit’ to change existing patient information. ’Details’
displays patient data in a read-only mode.
The Patient panel can also be accessed by clicking or tapping the Name or Patient ID field in
the Measurement panel. Two additional function buttons are available if the Patient panel is
accessed from the Measurement panel.
The ‘Select ID’ function associates the currently selected patient to the sample measurement
and returns to the Measurement panel. The ‘Cancel’ function returns to the measurement
panel without selecting any patient to associate to the sample measurement.
You can select either Name or Patient ID to be displayed as the patient identifier in the
Measurement panel by changing the settings in the ‘Patient’s displayed data’ in the Main
Menu/Settings/Customize panel.
To Next Page
Loading...
