Page 130 of 159
To replace reagent containers:
• Prepare the new container, and place it near
the place of operation.
• Open the bottle (remove cardboard flaps if
necessary (5L and 20L containers).
• Unscrew the cap from the used container
and place it into the new container.
• Replace the old containers with the new
ones.
• Dispose of used containers according to
local regulations.
When a reagent is replaced, it is not enough to
replace the external container only the reagent
level counter must also be reset.
Push the button below the corresponding
reagent bar to reset its level back to 100%.
Figure103. Reset of reagent status
15.2.7 Disposal of Reagent Containers
To Next Page
Loading...
