Page 44 of 159
Figure 25. Calibration in small sample module
• In QC menu there is a new feature for Small Sample Mode.
• Under Diagnostics, Information menu there is a new line which is indicating the state
(on/off) of the Small Sample Mode.
• In Self-test the presence of Microdilutor is also indicated.
• In measurement a new option will appear. There is a square you have to mark if you
would like to use the sample Small Sample Measurement Mode.
• Also you can choose the Tube type you will use at the measurement.
Figure 26. Measurement menu in Small Sample Mode
To Next Page
Loading...
